Technomed Services

Haemodynamic Monitor with Non Invasive Continuous Cardiac Output Monitor

Haemodynamic Monitor with Non Invasive Continuous Cardiac Output Monitor

Display continuous beat to beat non invasively measured haemodynamic, NiBP, SPO2 and Cardiac Output variables.
TFT Color Touch Screen Display.Display size minimum 10 inches.
Displays following parameters: Flow Parameters: Heart rate, Blood Pressure, stroke volume and Index, Cardiac Output, Cardiac Index. Contractility Parameters: Heather Index( Index of contractility), Velocity Index, Systolic Time Ratio, Fluid Parameters: Thoracic Fluid Content and Thoracic Fluid Index, Vascular Parameters: Propagation time of the pulse wave, Velocity of the aortic pulse wave, Systemic Vascular Resistance and Index, Total Arterial Compliance and Index.
Individual Colour Selection of displayed parameters and waveforms depending upon priority.
Audio and visual alarms for the selected parameters.
Three waveforms out of four waveforms can be selected. The waveforms to be displayed are ECG, ICG, IPG and IMP Displays the screen in various settings as below:
a) Monitoring Screen: 3 parameters and 3 selectable waveforms (ECG/ICG/IPG/IMP)
b) Diagnostic Screen: ICG and ECG Waveform, 7 selectable bars with reference ranges.
c) Trends Screen: 2 waveforms, Trends of four selectable parameters, selectable time scaling, Event Markers.
d) Therapeutic Display: Six selectable parameters, ICG and ECG Waveforms, Therapeutic graphs.

Based on variations in Bio-Impedance (measuring changes in volume and velocity of blood in Aorta) and displayed as Impedance Cardiography ICG Waveforms.
Based on advanced Physiological Adaptive Signal Analysis should provide key hemodynamic parameters non invasively.
Upgradable for Pediatrics and Neonates in the same machine.
Use only four surface electrodes.
System is able to indicate signal quality.
Portable system integrated with Latest PC with all original softwares.
Software for offline data analysis and data export (e.g. Excel).
Complies with Electrical Safety requirements of IEC 601-1, CLASS I Type BF.
Should be CE Marked or FDA approved product.
Optional Interface to patient monitors, such as Philips/HP (VueLink)
Additional Modules for NiBP SpO2 PWV (aortic Pulse Wave Velocity)
NiBP Measuring Range: 40- 260 mmHg with accuracy of +/- 3 mmHg
SPO2 Measuring Range: 1- 100% with accuracy of +/- 2% (70-100%)
Power supply: 100- 240 V AC; 50/60 Hz; with battery back up> 60 minutes
Following accessories to be supplied:
a) ECG/ ICG Patient Cable.- 01
b) NIBP Cuff- Adult.-01
c) SPO2 Cable-01
d) Thigh Cuff-01


For the Certified Professional Courses registration and other details please visit the website    http://tmscertifiedprofessional.com